Shadow Carbon 29" Velo Mast

Rating: 1-100 scoring system comparing key performance metrics across Ronix masts.

A new high-end mast that shadows your movements. Welcome to the building block of our high-end anti twist pleasure seeker. Countless suppliers, years of sourcing, and hundreds of prototypes led to this – the spirit of carbon working in a way we only dreamed imaginable.

Enjoy down the line drive mixed with a hard charging hairpin arc as you make hundreds of feet from your boat a levitating aquatic gymnasium. Fabricating a lightweight carbon mast is easy. Crafting an electrifying mind reading device that will predict your next and every move – that requires a persevering dedication to transcendent materials and processes.

This was arguably the biggest undertaking in the history of Ronix. We needed a spread tow carbon fiber that would evenly disperse the energy in a way we haven't ever experienced in a traditional carbon fiber, then we applied each laminate in its own unique degree of angle that will highlight your every move.

This is where the name Shadow came about: As we started to ride our rotating clockwork of laminates, we noticed the mast was mimicking our movements, not fighting our weight changes.

How does this happen? Anti-twist. There is so much torsional strain happening while foiling, and your mast is constantly fighting with this stress. So, we created a truly anti-twist layup that will always put you in the driver's seat of your motions.

Velo - short for velocity. You can now transfer to the 4th wave with the same ease as you could our aluminum mast on the second wave.

Where high end dreams become reality. The most complex spread tow carbon laminates layered with a pre cured resin each with a very specific degree of angle to achieve the best in strength, reactiveness, weight reduction, and vertical and torsional stiffness. The Shadow – mimicking your every movement with premier materials and processes.

Riding with a powerful hydrodynamic authority displacing water with greater efficiency. All aspects of your flight just became lighter, more reactive, and faster.

Wings made by air. You can't have the cleanest ride without having the cleanest technology. We make our wings using ice and air. Ronix proudly presents a manufacturing process usually reserved for F1 wings.

A lighter, more responsive environmentally friendly way of molding parts without any unused resin. The carbon laminates go in "dry" and just the right amount of frozen epoxy is then infused into the fibers.

Then, each product is put into an air chamber where the air is removed from the capsule. Through the 2-hour formation every finite portion of the product molds equally because of the evenly dispersed pressurized oxygen.

There is no crease or flash line – just a perfectly altered part without any stress points. The result is the thinnest, purest profile available. When you take that first cutback you will instantly feel the difference.

The most precision molded manufacturing. Cleanest water exit in foiling. Lighter construction using prepreg resins.

Length: 29"

Construction: Shadow Carbon - spread tow carbon fiber with anti-twist layup

Manufacturing: Autoclave process using ice and air with prepreg resins

Weight: Reduced by upwards of 1 lb compared to previous models

Performance: 97/100 turning radius, 97/100 glide efficiency, 97/100 pumping power

*Hardware included