Alloy Fluid Mast 24" / 28"

28" Height: This 28" size is designed for bigger waves that have a deeper undercurrent. You need to set the front wing deeper into the water line for a bigger wave.

24" Height: If you are riding behind jets, pontoon boats, waterski boats, or unweight wake boats there won't be as much water turning underneath. So a 24" mast is a perfect length for that shallower power zone. If you are using too tall of a mast and have a shallow wave - the wing will be too far below the power zone and the foil won't hook up the way it should with a shorter mast.

Rating: 1-100 scoring system comparing key performance metrics across Ronix masts.

We have tested a variety of foils in the marketplace. A common theme was feeling the foil setup turning in stages. Each pivot would be good for another "X" degrees until you finally arced through a sectioned turn. We were looking for an effortless turn like you get from ripping powder.

A shape manifested with a built-in metronome to keep a consistent, prolonged cadence. The temperament of this mast will see you through the progression of flight all the way to second wave exploration nearly 80 feet from the boat.

A fluid session will always have you feeling in control of your ride as you comfortably stand upright in a natural foil position. Don't let it fool you though - it's still very much capable of jumping on the gas for a port to starboard wave transfer – just with smooth, linked predictable turns.

A high-grade corrosion resistant alloy is pushed through a die to the desired cross section. This workhorse heat treated 6061 aluminum has a higher strength than other metals for increased wear and tear and a more solid connection between the different parts.

Lightweight: We hollow out the inside making it less than half the weight of a solid piece.

Sequence: Creates the correct ratio of dampening to response – this construction is not too slow or too fast – giving you the proper rhythm in your foiling.

Paired with our perfectly machined fuselage for the most solid connection in foiling. This design and strength are the perfect fulcrum for intermediate to advanced levels. With this mast you always know where you are, feel in control and have the power to leverage into your next movement.

Blended Leading Edge: We wanted the front portion of the mast to have that blend of speed and stability. We spent years covering the spectrum of aggressive penetrating leading edges that were too unpredictable, to blockier versions that didn't have the down the line quickness we were looking for.

Clean Trailing Edge: Arguably nothing alters the ride of your foil like how the water leaves your setup. Determining where the mast fades to a thinner contact point and how aggressive that happens will determine whether you are checking the efficiency box or the disruption version.

When purchasing an Individual Mast (Not a Complete Foil Kit): You will need to buy a mast top plate.

When purchasing a Complete Foil Kit: Every complete Ronix setup comes with all necessary hardware.

*Hardware included with complete kits