Moderator Wide Snowboard 2025
Moderator Wide Snowboard 2025
-
In Stock
The all-new unisex Moderator is your new quiver killer. Truly one board for everything. A medium (some might even say moderate) flex with a Tapered Directional Extra Camber profile, this board is built for smooth turns and pop while having just enough rise in the nose to float on those deeper days. No need to swap out decks or change your stance depending on conditions. The Moderator should be ridden in a standard length, no downsize needed. The Tapered Linear Quadratic Sidecut is designed for smooth turn initiation and powerful grip without washing out. The Moderator features our Slim Wall construction, where a urethane layer runs along the edge of the board to increase flex and damping to create a board that is at home anywhere on the mountain. This is a premium all-mountain board and features RIDE's Performance™ Light Core, Carbon Array™ 3, Sintered Stone Ground Base, and bio-resin. The Moderator will take you anywhere you want to go.
Ability Level: Intermediate,Expert
Response: Medium
Collection: All Mountain,Park,Powder
CONSTRUCTION:
Linear Quadratic Sidecut:
A directional sidecut utilizing Quadratic curvature from the tip to the rear insert pack, then progressing into a linear section into the tail. This creates smooth catch-free turn initiation and powerful support through the turn exit without losing grip.
Pre-Cured Glass Fiberglass:
USA-made pre-cured fiberglass optimizes glass to resin ratios to create the most consistent flex pattern possible. No other glass provides this level of stability and control.
Performance Light Core:
Specially formulated for the women’s line, this core combines lightweight Paulownia wood stringers with high strength Aspen.
Carbon Array Laminates:
This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.
Impact Plates Laminates:
Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.
Slim Walls:
RIDE's Slim Wall technology is the evolution of our Roll-in Construction to its extreme limit. By creating a fully 3-D composite structure over Slimewall® material, this revolutionary technology results in more efficient energy transfer, lighter weight construction, and even better damping.
Sintered Base:
High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.
Hybrid Glass:
Triaxial on top, biaxial on base; balanced torsional flex and stiffness for better response with speed.
Linear Carbon Laminates:
Two strips of carbon added below the core provide more snap for ollie power.
RIDE Snowboard Technology:
Engineered by snowboarders, for the most demanding riders on the planet. With over 30 years of experience in building high-quality products.
Product Description
The all-new unisex Moderator is your new quiver killer. Truly one board for everything. A medium (some might even say moderate) flex with a Tapered Directional Extra Camber profile, this board is built for smooth turns and pop while having just enough rise in the nose to float on those deeper days. No need to swap out decks or change your stance depending on conditions. The Moderator should be ridden in a standard length, no downsize needed. The Tapered Linear Quadratic Sidecut is designed for smooth turn initiation and powerful grip without washing out. The Moderator features our Slim Wall construction, where a urethane layer runs along the edge of the board to increase flex and damping to create a board that is at home anywhere on the mountain. This is a premium all-mountain board and features RIDE's Performance™ Light Core, Carbon Array™ 3, Sintered Stone Ground Base, and bio-resin. The Moderator will take you anywhere you want to go.
Ability Level: Intermediate,Expert
Response: Medium
Collection: All Mountain,Park,Powder
CONSTRUCTION:
Linear Quadratic Sidecut:
A directional sidecut utilizing Quadratic curvature from the tip to the rear insert pack, then progressing into a linear section into the tail. This creates smooth catch-free turn initiation and powerful support through the turn exit without losing grip.
Pre-Cured Glass Fiberglass:
USA-made pre-cured fiberglass optimizes glass to resin ratios to create the most consistent flex pattern possible. No other glass provides this level of stability and control.
Performance Light Core:
Specially formulated for the women’s line, this core combines lightweight Paulownia wood stringers with high strength Aspen.
Carbon Array Laminates:
This power distribution technology provides total board control in every stance location. Widespread carbon stringers placed at the binding zone gather input from any stance width and all pressure angles. Rider input is then channeled to the opposing contact point for maximum board control. Offered in two levels of technology, 3 & 5.
Impact Plates Laminates:
Added underneath each binding area to improve compressive strength and prevent board breaks where it matters most. Offered in two levels, Single and Double.
Slim Walls:
RIDE's Slim Wall technology is the evolution of our Roll-in Construction to its extreme limit. By creating a fully 3-D composite structure over Slimewall® material, this revolutionary technology results in more efficient energy transfer, lighter weight construction, and even better damping.
Sintered Base:
High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded.
Hybrid Glass:
Triaxial on top, biaxial on base; balanced torsional flex and stiffness for better response with speed.
Linear Carbon Laminates:
Two strips of carbon added below the core provide more snap for ollie power.
RIDE Snowboard Technology:
Engineered by snowboarders, for the most demanding riders on the planet. With over 30 years of experience in building high-quality products.
Moderator Wide Snowboard 2025
Shipping policy
In Store Pick Up is available; please choose which store you'd like to pick up from and select “Pick up” during checkout. Your order will be ready for pick up at the selected location by 5:00 pm the next business day. If you wish to have someone else pick up your order, please contact the store directly.
Shipping Fees:
Standard
Order subtotal up to $99.00: $14.99
Order subtotal over $99: Free*
Generally, you will receive your order within 6 business days. If you have not received your order within this time period, please check the tracking information or contact us for assistance.
*Free Shipping applies to orders shipped within Canada only
*Some oversized items may not be eligible for Free Shipping
*Remote locations may require additional charges; please contact us for shipping large items (surfboards, wake foils etc).
Expedited
Cost will vary based on destination and size of package; freight will be automatically calculated during checkout if you have selected this method. This is a 2 - 3 business day service to most destinations within Canada.
Within Canada, we ship with FedEx & Canada Post. US orders are shipped via UPS. We do ship to PO Boxes and General Delivery, however due to the increased risk we may require further information before processing the order. The customer assumes all responsibility for orders shipped to PO boxes or General Delivery.
Once your order is shipped, you will receive an automated email which includes tracking information. You may also inquire about your order by calling 1-800-316-7669, or emailing ordertracking@boardroomshop.com. Please note, it may take up to 48 hours for tracking information to appear on the carrier’s website.
We want to ensure your new prized possession gets to you in perfect condition. All boards are shipped in a board sleeve, wrapped with packing paper, nose and tail bumpers, and are placed in an individual snowboard box. We are unable to set up your board before shipping due to shipping restraints.
International
The Boardroom extends International shipping services to countries outside Canada, however please note that certain manufacturers, namely Ride, Nike, and Never Summer, are not available for shipping outside Canada. Shipping cost for international orders is a flat rate of USD$30.
It's important to note that customers are solely responsible for any additional customs duties, taxes, and fees that may apply. We recommend contacting your local customs office for detailed information on potential charges. International orders are considered Final Sale and are not eligible for return.
To ensure a reliable and secure delivery, we partner with trusted international shipping carriers like UPS. Estimated delivery times for international shipments vary, typically ranging from 5-12 business days. Please be mindful that customs clearance procedures in the destination country may lead to unforeseen delays beyond our control.
